Bookscanner
Bookscanning in Calafou:
- We made an event called Hack the Biblio: Let's make Digital Public Libraries in 2014 as a collaboration with memoryoftheworld, when Voja Antonic donated a bookscanner to Calafou: https://calafou.org/en/content/hack-biblio-construir-bibliotecas-publicas https://calafou.org/en/content/voja-antonic-calafou
- We scan out of print books published by Virus: http://www.viruseditorial.net/
- We built a book scanner in 2018 during the Kunlabora event for supporting other collectives that want to scan: https://calafou.org/en/content/kunlabora-ephimeral-projects-kooperative
This page is documenting the design and construction of bookscanners. For the tutorial that explains "How to use the bookscanner", go to http://wiki.calafou.org/index.php/Bookscanning
Building a "New Standard Scanner"
We built this: https://forum.diybookscanner.org/viewtopic.php?f=1&t=333 during the Kunlabora event in Calafou: https://calafou.org/en/content/kunlabora-ephimeral-projects-kooperative A more reproducible and portable and simple scanner.
In theory for the simple scanner it should be possible to get all the ingredients from a hardware shop ("ferreteria"). We got most of the materials from Bauhaus in Barcelona (Zona Franca). Our experience was that most of the screws, nuts and bolts are easy to substitute with others that have more or less the same dimensions.
Budget
Kunlabora event was four days of collaborative construction. More or less six persons worked on building the scanner. This is the receipts that we spent, because we had 500 EUR budget for the raw materials from the participation fee of the event.
Receipts:
25 2x plexiglass [J] @ Expocryl, Igualada 18 2x SD cards @ Life Informatica, Barcelona 50 2x magic want camera stand @ FotoK, Barcelona 42.2 Nuts/bolts/etc. @ Bauhaus, Zona Franca, Barcelona 108.8 Nuts/bolts/etc. @ Bauhaus, Zona Franca, Barcelona 10 2x USB cable male/female @ Worten San Antoni, Barcelona 5 2x mini USB (USB-B) cable @ Tienda Cables, Barcelona 178 2x Canon IXUS 175 compact digital camera @ Amazon.es 60 4x Listones @ Fustes Fargas, Barcelona ============================================ 497
Donations:
70 Raspberry Pi 3 (Model B), 2x SD cards, 5V charger, rulers [M] @ Barcelona
We also used nuts and bolts, etc. found in the workshop of Calafou (in Catalunya, near Barcelona). The conclusion is that it should be possible to build this scanner from about 5-600 EUR anywhere in (Western) Europe. We did not use all the materials we bought and if we would do it again then we tried to use real wood instead of FDM, because the latter proved very fragile. However, this could make the platen more heavy, and it is already quite heavy.
Parts / componentes
From Bauhaus, Barcelona (Zona Franca):
- 2x Tablero MDF 600x400x10cm - 2x Tablero MDF 600x400x16cm - Varilla roscada - 2x Tira LED 1 nice - Multienchufa 5 tomas - Base 4 tomas 1.5 mts - Tuerca hexagonal - Guia corredera - 2x Arandela ancha - Aldabon BPF 185 M - Tornillo mad.cab.pl. - Tornillo cab. avell. - Tornillo p/metal - Tuerca palomilla - Guia cajones 10kg - Spax cab. red zinc - Tirador dorado
- 4x Abrazaderas - Colgador acero negro - Mosqueton-fw
Other things from other shops:
- 3x Cable USB 2.0 male-female @ Worten Sant Antoni - 2x USB-A -> USB-B (mini) cables @ Tienda de Cables - 2x Manfrotto brazo flexible MF237 (Nr. referencia AFP018036) @ FotoK, Ronda Universitat - 2 x digital cameras (see below for background information): Canon IXUS 175 (Powershot / ELPH 180) - https://www.amazon.es/Canon-IXUS-175-compacta-estabilizador/dp/B01A8QU70I/ - http://chdk.wikia.com/wiki/ELPH180 - https://www.canon-europe.com/for_home/product_finder/cameras/digital_camera/ixus/ixus_175/specification.aspx - 2 x gooseneck camera stand ("magic wand") - 2 x plexi glass from a company in Igualada that J. found.
For electronic parts a good shop in Barcelona is Diotronic: https://diotronic.com/
Cameras
The bookscanner is basically a glorified camera stand that allows us to take good pictures of book pages. So the cameras are an important part of the bookscanner. Summary of research about cameras for book scanners:
Basically there are three categories of cameras that can be used for book scanners (from cheapest to most expensive).
1. Remote control support
The cheapest option is any camera with remote trigger support, so we can take pictures without pushing the button on the camera. This is important because when you press the button the camera position may be disadjusted to the physical pressure.
2. CHDK firmware
Middle category is CHDK firmware compatibles. CHDK is a third party open source firmware that allows the customisation of cameras. CHDK firmware is for Canon Powershot cameras, which are the cheaper compact digital camera product line. We have 200 euros in the budget for cameras, so we went with this option.
3. Magic Lantern support
Magic Lantern is a third party open source firmware that is more advanced. However, it only works with Canon DLSR cameras (these are the cameras that have a reflex mirror to look at the shot through a small hole before you take the picture, and they usually have big lenses). The scanner we have now uses Canon 1100D, which are the cheapest type suported by Magic Lantern, but they still cost a few hundred euros.
Building process
Base / Base
Column / Columna
Cradle / Cuna
Platen / Platina
CHDK
Shopping photos
Shopping
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: Unable to save thumbnail to destination
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: Unable to save thumbnail to destination
- Error creating thumbnail: Unable to save thumbnail to destination
Base photos
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Cradle photos
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Platen photos
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Column photos
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
- Error creating thumbnail: File missing
Pictures Day 1 (temporary)
- Error creating thumbnail: File missing
Raspberry Pi for the bookscanner
At the moment we use an electromechanical button documented on the CHDK website that works well but does not do much more than triggering the two cameras to shoot at the same time. There are many more possibilities of how to optimise the bookscanning process. Many ideas start with connecting the cameras to a small computer such as the Raspberry Pi. We made some experiments and tests with this setup, which is documented below:
It runs Raspbian.
CHDKPTP
In /home/pi/chdkptp there are precompiled binaries of CHDKPTP downloaded from here.
CHDKPTP is used for remote control of camera running CHDK firmware.
Our setup has two modes of work:
- mechanical "button" which triggers both camera capturing its photo
- (in progress) Raspberry Pi mode where an bookscanner operator uses Raspberry Pi to capture photos, preview photos in real time and transfer them already renamed for the next step in Scantailor.
When camera is connected this line will list info about the camera e.g.:
sudo ./chdkptp.sh -elist
and for one of the camera this is what is listed then:
-1:Canon IXUS 175 b=001 d=030 v=0x4a9 p=0x32c1 s=8B20D62641B041BAA3E1D597D560D110
An example of capturing a picture from commandline (once in /home/pi/chdkptp/):
sudo ./chdkptp.sh -e"connect -d=030" -erec -eshoot
Above line connects to the camera sitting on -d=021, puts it into rec mode (if not already) and capture the photo saving it to SD card already in camera. If one wants to bypass the SD card altogether it should replace -eshoot with -eremoteshoot. In that case ./chdkptp.sh will save photos into the directory from where it was called.
ZeroTier
It is added to 565799d8f6ebf1a8 public network of ZeroTier with this command:
sudo zerotier-cli join 565799d8f6ebf1a8
and it got static IP address (in 565799d8f6ebf1a8 network):
192.168.192.171/24
In /home/pi/.ssh/authorized_keys public keys of maxigas and marcell are added.
Ideas for building Voja's scanner
Our first idea was to reproduce Voja's scanner but we had to realise that we are not Voja and the scanner is very beautiful and unique engineering and consequently it is hard to reproduce.
Here are two links to the public documentation of our scanner, built by Voja Antonic:
https://www.memoryoftheworld.org/blog/2012/10/28/our-beloved-bookscanner-2/
https://hackaday.io/project/5604-diy-book-scanner
The electronics is not really documented (which means that it is hard to reproduce) and it is built from basic parts (which means that it takes a lot of time to put it together). So we brainstorm about an Arduino-based solution instead. Arduino is a general-purpose programmable microcontroller that has already built-in many of the functions/parts we need. The idea is that this makes it easier for us to build the scanner and for others to reproduce it. We also have more experience working with Arduino than with only basic electronic components.
We will also try to use cheaper cameras in order to bring down the budget.
Biblio-graphy
About our first bookscanner
Principal sources
Reading And Leading With One Laptop Per Child
