Omnius: Difference between revisions

From Wiki-Fou
(Add disk slots)
(Add IDE docs)
Line 1: Line 1:
Omnius is the main server providing services on the calafou internal network (".calafou").
Omnius is the main server providing services on the calafou internal network (".calafou").


How the disks are connected?
= Hardware setup =
 
== How the disks are connected? ==


Omnius has an old motherboard without SATA support. The workaround is that there is a RAID controller card installed in a PCI slot. However, the RAID controller card driver is not working with Debian, so we actually use software RAIDs. The function of the RAID controller card is simply to provide 4 SATA ports where we can connect hard drives.
Omnius has an old motherboard without SATA support. The workaround is that there is a RAID controller card installed in a PCI slot. However, the RAID controller card driver is not working with Debian, so we actually use software RAIDs. The function of the RAID controller card is simply to provide 4 SATA ports where we can connect hard drives.


Which disks are connected?
The only disk that is connected directly to the motherboard through IDE (''not'' SATA) is the operating system disk.
 
== Which disks are connected? ==


There are many disks in omnius.
There are many disks in omnius.
Line 16: Line 20:
6. Alexandria RAID1 (copy).
6. Alexandria RAID1 (copy).


Where are the disks connected?
== Where are the disks connected? ==


The box of omnius has a lot of space for hard disks:
The box of omnius has a lot of space for hard disks:
Line 32: Line 36:
11. apt-cacher
11. apt-cacher


What are the BIOS problems?
== What are the BIOS problems? ==


Blinking cursor: After the message "Successfully installed BIOS" the screen goes black and there is only a blinking cursor. The solution to this problem is to turn off the "BBS support" option in the RAID controller menu, in the SATA configuration section (enter with Control-A when booting).
Blinking cursor: After the message "Successfully installed BIOS" the screen goes black and there is only a blinking cursor. The solution to this problem is to turn off the "BBS support" option in the RAID controller menu, in the SATA configuration section (enter with Control-A when booting).


What are the basic hardware specifications?
== What are the basic hardware specifications? ==


RAM: omnius has 1GB of RAM. The motherboard has 4 slots which are divided into two banks. Each bank has to have identical amount of RAM. At the moment only the first bank is used and there are two 512MB RAMs installed in them.
RAM: omnius has 1GB of RAM. The motherboard has 4 slots which are divided into two banks. Each bank has to have identical amount of RAM. At the moment only the first bank is used and there are two 512MB RAMs installed in them.

Revision as of 21:45, 7 May 2016

Omnius is the main server providing services on the calafou internal network (".calafou").

Hardware setup

How the disks are connected?

Omnius has an old motherboard without SATA support. The workaround is that there is a RAID controller card installed in a PCI slot. However, the RAID controller card driver is not working with Debian, so we actually use software RAIDs. The function of the RAID controller card is simply to provide 4 SATA ports where we can connect hard drives.

The only disk that is connected directly to the motherboard through IDE (not SATA) is the operating system disk.

Which disks are connected?

There are many disks in omnius.

1. Operating system. 2. Operating system RAID1 (copy). 3. apt-cacher (proxy for caching Debian packages). 4. pxe (networking booting for installing Linux on machines that are connected to the local network). 5. Alexandria (mainly media files like films and music). 6. Alexandria RAID1 (copy).

Where are the disks connected?

The box of omnius has a lot of space for hard disks:

1. EMPTY 2. EMPTY 3. alexandria 4. alexandria 5. EMPTY 6. EMPTY 7. EMPTY 8. omnius-os 9. EMTPY 10. EMPTY 11. apt-cacher

What are the BIOS problems?

Blinking cursor: After the message "Successfully installed BIOS" the screen goes black and there is only a blinking cursor. The solution to this problem is to turn off the "BBS support" option in the RAID controller menu, in the SATA configuration section (enter with Control-A when booting).

What are the basic hardware specifications?

RAM: omnius has 1GB of RAM. The motherboard has 4 slots which are divided into two banks. Each bank has to have identical amount of RAM. At the moment only the first bank is used and there are two 512MB RAMs installed in them.